|
|
|
 |
| LS30 FLANGE direct output |
With the signal converter integrated with LS30 Level Controller, the level info is converted directly to 0-10V & 4-20mA analog signal. This signal may be connected to the automation system without having to use Digital Controller.
| | |
 |
| LS30 FLANGE analog |
Level info received fromLS30 Level Controller is transmitted to Analog Gauge, allowing monitoring the level. Due to dial gauge area of the Analog Gauge, it is preferred especially in the ship and yacht building applications.
| | |
 |
| LS30 FLANGE digital |
Signal received from LS30 Level Controller is transmitted to LS30 Digital Controller and change of level may be monitored in percentage, volume, mass or distance units. Level info may be transmitted from the Digital Controller through 0- 10V & 4-20mA analog input to PLC or automation system. Thus all desired controls may be performed from the automation program. Additionally, dry contact can be got via 3 relay output fixed in the Controller. In this way, 3 different devices such as motor, pump, valve or light-audio alarm may be operated.
| | |
 |
| LS30 THREAD analog |
Level info received fromLS30 Level Controller is transmitted to Analog Gauge, allowing monitoring the level. Due to dial gauge area of the Analog Gauge, it is preferred especially in the ship and yacht building applications.
| | |
 |
| LS30 THREAD digital |
Signal received from LS30 Level Controller is transmitted to LS30 Digital Controller and change of level may be monitored in percentage, volume, mass or distance units. Level info may be transmitted from the Digital Controller through 0- 10V & 4-20mA analog input to PLC or automation system. Thus all desired controls may be performed from the automation program. Additionally, dry contact can be got via 3 relay output fixed in the Controller. In this way, 3 different devices such as motor, pump, valve or light-audio alarm may be operated.
| | |
 |
| LS30 THREAD direct output |
With the signal converter integrated with LS30 Level Controller, the level info is converted directly to 0-10V & 4-20mA analog signal. This signal may be connected to the automation system without having to use Digital Controller.
| | |
 |
| MS10 |
Providing a wide range of applications with its polypropylene or polymite material construction, MPIX series is level switches ensuring Normally On or Normally Of contact. It may be attached to the reservoir on the top or bottom. PP (Polypropylene) material is suitable for water and dilute acid applications and PA (Polymite) material for oil and fuel applications.
| | |
 |
| MS11 |
Providing a wide range of applications with its polypropylene or polymite material construction, MPIX series is level switches ensuring Normally On or Normally Of contact. It may be attached to the reservoir on the top or bottom. PP (Polypropylene) material is suitable for water and dilute acid applications and PA (Polymite) material for oil and fuel applications.
| | |
 |
| MS12 |
Providing a wide range of applications with its polypropylene or polymite material construction, MPIX series is level switches ensuring Normally On or Normally Of contact. It may be attached to the reservoir on the top or bottom. PP (Polypropylene) material is suitable for water and dilute acid applications and PA (Polymite) material for oil and fuel applications.
| | |
 |
| MS13 |
Providing a wide range of applications with its polypropylene or polymite material construction, MPIX series is level switches ensuring Normally On or Normally Of contact. It may be attached to the reservoir on the top or bottom. PP (Polypropylene) material is suitable for water and dilute acid applications and PA (Polymite) material for oil and fuel applications.
| | |
 |
| MS20 |
It has a wide range of usage offered and price advantage. With its stainless steel float and body, it is ideal for open top or low pressure tank applications. It has cable output and can be easily attached to metal or plastic tanks.
| | |
 |
| MS21 |
It has a wide range of usage offered and price advantage. With its stainless steel float and body, it is ideal for open top or low pressure tank applications. It has cable output and can be easily attached to metal or plastic tanks.
| | |
 |
| MS30 |
It has standard cable output. With its stainless steel float and body construction, it is ideal for open top or low pressure tank applications. It has cable output and can be easily attached to metal or plastic tanks.
| | |
 |
| MS31 |
It has standard cable output. With its stainless steel float and body construction, it is ideal for open top or low pressure tank applications. It has cable output and can be easily attached to metal or plastic tanks.
| | |
 |
| MS40 |
It may be made as socket and cable output. With its stainless steel float and body construction, it is ideal for open top or low pressure tank applications. It has cable output and can be easily attached to metal or plastic tanks.
| | |
 |
| MS41 |
It may be made as socket and cable output. With its stainless steel float and body construction, it is ideal for open top or low pressure tank applications. It has cable output and can be easily attached to metal or plastic tanks.
| | |
 |
| |
With the signal converter integrated with LS30 Level Controller, the level info is converted directly to 0-10V & 4-20mA analog signal. This signal may be connected to the automation system without having to use Digital Controller.
| | |
 |
| LS30 THREAD with Analogue Gauge |
With the signal converter integrated with LS30 Level Controller, the level info is converted directly to 0-10V & 4-20mA analog signal. This signal may be connected to the automation system without having to use Digital Controller.
| | |
 |
| LS20 Bilge |
It is designed for your bilge and open tank applications. There are changeover switches in the body ensuring to re c e i v e “Normal l y Open” and “Normally Closed” contact.
| | |
 |
| LS20 Flange |
It is designed for your closed tank applications suitable for flange connection. There are changeover switches in the body ensuring to receive “Normally Open” and “Normally Closed” contact.
| | |
 |
| LS20 Thread |
It is designed for your closed tank applications suitable for thread connection. There are hangeover switches in the body ensuring to receive “Normally Open” and “Normally Closed” contact.
| | |
 |
| LS20 Ex Proof |
They are level switches with certificated junction box suitable for applications where Ex-Proof conditions are required. There are changeover switches in the body ensuring to receive “Normally Open” and “Normally Closed” contact.
| | |
 |
| Ls 20 with test arm |
On the versions with test arm, the operating test can be conducted mechanically without having to perform filling - discharging operations. It works on the principle of test arm changing the float position.
| | |
 |
| LS20 with Protection |
It is the level switches encased by stainless protection case to protect it against any impacts or damages that may occur in the operating environment. With its screw and welding connection options, it is ideal for open tank applications.
| | |
 |
| LS20 Multiple |
Thanks to multiple float and contact applications which can be designed according to your requirement, more than one independent check point may be formed and connect them to the automation system or current control system for easier control.
| | |
 |
| LS20 with Controller |
It is designed for applications that require high switching capacity. Dry contact may be received up to 10 different points by using more than one cont roller. Start - stop operations are performed via LS20 Controller.
| | |
 |
| LS30 Digital Controller |
It is used with MLG30 and LS30 Level Control Equipments. 3 units of NO+NC contact relay output with maximum capacity 250 VAC 10A are available. Level status can be viewed from the display and from the automation with 0-10V & 4-20mA analog output.
| | |
 |
| LS30 Analogue Gauge |
Liquid level may be viewed from the gauge display by means of LS30 Analog Gauge which is used by connecting it to MLG30 or LS30 Level Control Equipments on the tank.
| | |
 |
| LS20 Controller |
It performs switching between PS10 Limit Switches and devices which will be operated dry contact. More than one may be used depending on the contact numbers to be received. 4 units of PS10 Limit Switches may be connected to one controller.
| | |
 |
| Flange |
They are DIN-compliant flanges manufactured as suitable for welding prepared according to the connection sizes of the Level Control Equipment.
| | |